收藏本站
Notes on Using FPC Connectors
■ Precautions for insertion/removal of FPC
<Front-Lock>
? To open the lever, hold its center and pull it up. An uneven load
applied to the lever on one side may deform and break the lever.
Do not apply an excessive load to the lever in the opening
direction, otherwise, the terminals may be deformed.
? Don’t further apply an excessive load to the fully opened lever;
otherwise, the lever may be deformed.
? Fully open the lever to insert an FPC.
? Since this product connects at the bottom, please insert the
FPC so that its electrode plane is facing the board to which it will
be mounted. Do not insert the FPC in the reverse direction of the
<Back-Lock>
? Avoid touching the lever (applying any external force) until an
FPC is inserted.
Do not open/close the lever without an FPC inserted. Failure to
follow this instruction will cause the contacts to warp, leading to
the contact tips to interfere with the insertion of an FPC,
deforming the terminals. Failure to follow this instruction may
cause the lever to be removed, terminals to be deformed, and/or
the FPC insertion force to increase.
Without an FPC inserted
contact section; otherwise, operation failures or malfunctions
may be caused.
(140 ° )
? The FPC insertion section is on the opposite side of the lever.
Be careful not to make a mistake in the FPC insertion position or
the lever opening/closing position. Otherwise, a contact failure or
connector breakage may occur.
? Do not insert an FPC upside down. Inserting an FPC in a
direction opposite to that you intended may cause an operation
(Y3FT)
? This product has a structure to position an inserted FPC using
the FPC tabs.
Therefore, insert an FPC at an angle to the board. If the FPC is
inserted in the direction parallel to the board, the molded
positioning parts block the FPC, leading to incomplete insertion.
Do not insert the FPC at an excessive angle to the board.
Otherwise, it may cause the deformation of metal parts, FPC
insertion failures, and FPC circuit breakages.
FPC
FPC positioning part
(Y3F)
? Completely insert the FPC horizontally. Do not insert the FPC
at an excessive angle to the board. Otherwise, it may cause the
deformation of metal parts, FPC insertion failures, and FPC
circuit breakages.
FPC
? Insert the FPC to the full depth of the connector without
altering the angle.
? When closing the lever, carefully use the tip of your ?nger to
push the entire lever or both sides of it. If pressure to the lever is
applied unevenly, IE: only the edge, it may deform or break the
FPC. Make sure that the lever is closed completely. Not doing so
will cause a faulty connection.
? Avoid applying an excessive load to the top of the lever during
or after closing the lever. Otherwise, the terminals may be
deformed.
? Remove the FPC at an angle with the lever fully opened. If the
lever is closed, or if the FPC is forcedly pulled into a direction
parallel to the board, the molded part may break.
failure or malfunction.
? Insert an FPC with the lever opened at right angle, that is, in
the factory default position.
? Completely insert the FPC horizontally. An FPC inserted at an
excessive angle to the board may cause the deformation of
metal parts, FPC insertion failures, and FPC circuit breakages.
? Insert the FPC to the full depth of the connector without
altering the angle.
? Insert the FPC into the connector after checking the position of
FPC insertion slot and FPC. Do not insert the FPC without
positioning the FPC and connector. Otherwise, it may cause
connector breakages. When it is hard to insert the FPC, do not
insert the FPC on that condition. Con?rm the FPC and
connector positioning.
? Do not apply an excessive load to the lever in the opening
direction beyond its open position; otherwise, the lever may be
deformed or removed.
? Do not apply an excessive load to the lever in a direction
perpendicular to the lever rotation axis or in the lever opening
direction; otherwise, the terminals may be deformed, and the
lever may be removed.
? To close the lever, turn down the lever by pressing the entire
lever or both sides of the lever with ?ngers tips. And close the
lever completely. Be careful not to apply partial load to the lever
that may cause its deformation or destruction.
Close the lever completely to prevent contact failure.
? If pressure to the lever is applied unevenly, it may deform or
break the FPC. Make sure that the lever is closed completely.
Not doing so will cause a faulty connection.
? Avoid applying an excessive load to the top of the lever during
or after closing the lever. Otherwise, the terminals may be
deformed.
? When opening the lever to remove the FPC, ensure that the
lever will not go over the initial position; otherwise, the lever may
be removed.
ACCTB13E 201303-T
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
AYF512415 CONN SOCKET FPC 0.5MM 24POS SMD
AYF522615 CONN SOCKET FPC 0.5MM 26POS SMD
AYF535065 CONN SOCKET FPC 0.5MM 50POS SMD
B004-004-R SWITCH KVM PS/2-4PORT WO/CABLES
B004-008 SWITCH KVM 8 PORT 1U RACK MT PS2
B006-004-R SWITCH KVM USB 4 PORT W/O CABLES
B007-008 SWITCH KVM 8 PORT 1U RACK MT PS2
B013-000 CONSOLE KVM EXTENDER PS2 CAT5E
相关代理商/技术参数
AYF350725A 功能描述:7 Position FPC Connector Contacts, Top 0.012" (0.30mm) Surface Mount, Right Angle 制造商:panasonic electric works 系列:Y3BL 包装:剪带 零件状态:在售 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触点，顶部 针脚数:7 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.023"（0.60mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 标准包装:500
AYF351125A 功能描述:CONN FPC TOP 11POS 0.3MM SMD R/A 制造商:panasonic electric works 系列:Y3BL 包装:剪带 零件状态:在售 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触点，顶部 针脚数:11 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.023"（0.60mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 触头镀层厚度:- 外壳颜色:- 致动器颜色:- 配接次数:20 标准包装:500
AYF351525 功能描述:15 Position FPC Connector Contacts, Top 0.012" (0.30mm) Surface Mount, Right Angle 制造商:panasonic electric works 系列:Y3BL 包装:带卷（TR） 零件状态:有效 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触点，顶部 针脚数:15 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.023"（0.60mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 标准包装:5,000
AYF351525A 功能描述:CONN FPC TOP 15POS 0.3MM SMD R/A 制造商:panasonic electric works 系列:Y3BL 包装:剪带 零件状态:在售 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触点，顶部 针脚数:15 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.023"（0.60mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 触头镀层厚度:- 外壳颜色:- 致动器颜色:- 配接次数:20 标准包装:500
AYF351725 制造商:Panasonic Electric Works 功能描述:FPC CONNECTOR Y3BL (0.3MM PITC 制造商:Panasonic Electric Works 功能描述:FPC Connector Y3BL (0.3mm pitch) Back Lock Type
AYF352125 制造商:Panasonic Electric Works 功能描述:FPC CONNECTOR Y3BL (0.3MM PITC 制造商:Panasonic Electric Works 功能描述:FPC Connector Y3BL (0.3mm pitch) Back Lock Type
AYF352325A 功能描述:CONN FPC TOP 23POS 0.3MM SMD R/A 制造商:panasonic electric works 系列:Y3BL 包装:剪带 零件状态:在售 扁平柔性类型:FPC 安装类型:表面贴装，直角 连接器/触头类型:触点，顶部 针脚数:23 间距:0.012"（0.30mm） 端接:焊接 FFC，FCB 厚度:0.20mm 板上高度:0.023"（0.60mm） 锁定功能:翻转锁定，背锁 电缆端类型:锥形 触头材料:铜合金 触头镀层:金 外壳材料:液晶聚合物（LCP） 致动器材料:液晶聚合物（LCP） 特性:- 额定电压:50V 工作温度:-55°C ~ 85°C 材料可燃性等级:UL94 V-0 额定电流:0.2A/触头 触头镀层厚度:- 外壳颜色:- 致动器颜色:- 配接次数:20 标准包装:500
AYF352725 制造商:Panasonic Electric Works 功能描述:FPC CONNECTOR Y3BL (0.3MM PITC 制造商:Panasonic Electric Works 功能描述:FPC Connector Y3BL (0.3mm pitch) Back Lock Type